A permanent, moisture-cured, UV stable black top coat primarily used for top coating surfaces previously sealed with KBS RustSeal. BlackTop dries to a rock hard yet flexible coating that can be readily applied to chassis, coil springs and light weight panels.
NI-610 is a “High Performing” 2 pack (2K) high gloss, isocyanate cured polyurethane
topcoat based on Axalta owned technology. The resulting durable coating delivers
excellent weathering and anti-corrosion properties (when applied over the
recommended primers & Primer surfacers) and is suitable for use where a high
performance type of 2K PU coating is required.
NI-640 is a quick and easy-to-use single pack acrylic enamel topcoat. It is
specifically formulated to give a 1K single stage topcoat that will touch dry in
normal ambient conditions within 20-30 mins depending on the temperature. It will
be dry to handle (without baking) in 2-3 hours (fully hard dry, up to 7 days). NI-
640 Line colours give faster drying & overall better performance when compared
to the typical QD (Quick Dry) alkyd enamel. This is a particular advantage when
painting large objects such as tractors & mining equipment.
NI-650 Line is an economical single pack quick drying alkyd gloss spraying
enamel that is specifically formulated to give a 1K single stage topcoat that will
touch dry in normal ambient conditions within 20-30 min depending on the
temperature. It will be dry to handle (without baking) in 3-4 hours (fully hard dry,
up to 7 days) without baking. NI-650 Line colours are a low cost topcoat for the
painting of objects such as machinery.
NI-680 is a 2 pack glossy, high film build and isocyanate cured polyurethane topcoat,
designed for application as direct-to-metal (DTM). This product is based on Axalta
owned technology resulting with a highly durable coating, which delivers outstanding
weathering and good anti-corrosion properties. Nason® Industrial NI-680 is a mix
system using custom colour Mix binder ST100-680 and concentrated Nason®
Industrial tints that enables matching industrial and standard colours.
GRAVITEX is a tough, hard, durable coating designed to reproduce the manufacturers original stone chip finish. It will protect against stone chips, salt, damp and rust, it will also help to deaden sound and vibrations.
REFACE is a highly effective two component spray filler for the preparation of irregular steel and glass fibre surfaces. Very high build, adheres excellently to steel, is easy to sand and is the ideal base for most paint systems..
S2025 is a high solids VOC compliant 2K acrylic coating that can be used as a multi-role coating. Excellent opacity and coverage, Can be air dried, low baked or IR Cured. Easy to sand, excellent film build surface levelling properties.
MOTOSPRAY RUST CONVERTER & PRIMER/SEALER is a rust converter with primer/ sealer built in.In one step it chemically reacts with rust, converting it to a hard inert organic compound, and then seals the surface with an impervious coating. This coating is a suitable base for a variety of paint systems including automotive acrylics, Enamels, 2 Pack and waterbased.
MOTOSPRAY ISOLATOR is designed to isolate an existing sensitive paint film from a re-finishing coat that is likely to adversely affect it. It is a versatile single pack product that may be used with both single and two pack paint systems.
HICHEM 2 PACK ISO-FREE PRIMER ISOLATOR is a high build primer filler isolator with excellent adhesion, build and hold out properties. May be thinned to reduce the viscosity for use as a lower build Isolator or primer/surfacer.
A versatile 2 Pack isocyanate free Clear that offers a tough and durable coating with excellent gloss and film clarity. Suitable for use over Acrylic Solid Colours, COB Colours, 2 Pack Basecoat Colours.
2k EPOXY ZPP is a 2-pack epoxy zinc phosphate primer for use under 2k topcoats. Light grey in colour and is easy sanding, tough and durable, strong adhesion to steel and other metals, high corrosion, chemical and abrasion resistance.